RichUK
Just got the front wheel off for a good old clean up & polish and upon closer inspection I saw that all the holes were closing up!
Lots of baked in brake dust I guess.
So I measured the holes against my drills and they appear to be 7mm so I cleaned them all with a 6.8mm drill.
Next came a quick sanding of the disk to clean that back, followed by scotchbrite.
Then a mini wire brush on a dremel to get the bits near the rivets, and brighten the rivets up.
Finally de-rusted the disk bolts and gave each a coat of silver paint.
Just need to re-wash and can start polishing & waxing.
Then it's on to the calipers...
Lots of baked in brake dust I guess.
So I measured the holes against my drills and they appear to be 7mm so I cleaned them all with a 6.8mm drill.
Next came a quick sanding of the disk to clean that back, followed by scotchbrite.
Then a mini wire brush on a dremel to get the bits near the rivets, and brighten the rivets up.
Finally de-rusted the disk bolts and gave each a coat of silver paint.
Just need to re-wash and can start polishing & waxing.
Then it's on to the calipers...