Hey guys, After a year long hiatus and a day job that has driven me batty I have decided to make a go on my own. Motohooligan is going to be a part of this move. I will have all the old product back into production and in stock ASAP and plan on developing new bling goodies for both the old style and new 1290.
If there is anything you guys would like to see let me know.
Thanks for all the past support, and hopefully some future too
Aaron
Motohooligan
2014-09-28 20:31:00 UTC
Colonel_Klinck
2014-09-28 20:51:00 UTC
Good to see you back dude
cdlabate
2014-09-28 20:55:00 UTC
Welcome back!
Now make with the 1290 airbox sharpish!
Now make with the 1290 airbox sharpish!
Motohooligan
2014-09-28 20:57:00 UTC
SDNerd
2014-09-28 20:59:00 UTC
If anyone in the Denver area would offer up their 1290 for development let me know
jambox
2014-09-28 21:07:00 UTC
I just bought one of your airboxes second hand off ebay. Thought it was my last chance! I would buy a set of the gas tank relocation brackets for sure.
ripzay
2014-09-28 21:19:00 UTC
Always great to learn of someone willing to take that risk to pursue what they're passionate about. Takes real guts to do this.
Glad you're back in business, and will again be a customer. Look forward to your new developments, and wish you success.
Worthwhile to solicit others, but I would like to see plates (and perhaps shift rods as part of a "kit") that allow for adjustability of the OE rearsets. Range should include OE position at ~center of plates; allowing forward and down, as well as up and back from there. If forward proves impractical, at least down then.
Even better if they are the "weakest point" in the event of a get-off, such to prevent bending/breaking of the frame tabs where the OE rearsets normally mount.
Would be gad to work with you to prototype-evaluate them (unfinished is fine).
Glad you're back in business, and will again be a customer. Look forward to your new developments, and wish you success.
Worthwhile to solicit others, but I would like to see plates (and perhaps shift rods as part of a "kit") that allow for adjustability of the OE rearsets. Range should include OE position at ~center of plates; allowing forward and down, as well as up and back from there. If forward proves impractical, at least down then.
Even better if they are the "weakest point" in the event of a get-off, such to prevent bending/breaking of the frame tabs where the OE rearsets normally mount.
Would be gad to work with you to prototype-evaluate them (unfinished is fine).
Motohooligan
2014-09-28 22:00:00 UTC
Good to see you back mate.
But seriously, who are ya?
aracheon
2014-09-28 22:08:00 UTC
Superduke owners around the globe rejoice!
I for one am happy especially as you say you are rebirthing the old (990) products and not just focusing on the 1290!
Glad to hear.. I better start saving all my pocket money!
I for one am happy especially as you say you are rebirthing the old (990) products and not just focusing on the 1290!
Glad to hear.. I better start saving all my pocket money!
Motohooligan
2014-09-28 22:45:00 UTC
Post missing.
Stratkat
2014-09-28 22:46:00 UTC
Post missing.
bic_bicknell
2014-09-28 23:00:00 UTC
Post missing.
MrK
2014-09-29 13:07:00 UTC
this is just awesome news dude, best of luck. i love your stuff!
Stupid Luke
2014-09-29 19:58:00 UTC
Good one Aaron.
Nice to see you back in business. I, for one, will always recommend your products and quality.
Big fan of everything you are doing.
PS, I'll do you another intsallation manual for the 1290 if you send me one to keep!
(that's a 1290 not and airbox mate)
Nice to see you back in business. I, for one, will always recommend your products and quality.
Big fan of everything you are doing.
PS, I'll do you another intsallation manual for the 1290 if you send me one to keep!
(that's a 1290 not and airbox mate)
jambox
2014-09-29 20:14:00 UTC
Good news, I was hoping to buy motohooligan some time ago, but unfortunately it wasn't available so I end up with Rotty (which is good too) but good to hear that there is some passion behind the product and it comes back on the market
fentos
2014-09-29 20:38:00 UTC
Post missing.
Colonel_Klinck
2014-09-29 20:45:00 UTC
Post missing.
scamb66
2014-09-30 01:18:00 UTC
Great news! Already have your air box, looking forward to adding some more parts!
Motohooligan
2014-09-30 19:13:00 UTC
Dude I've resurrected your page and made it a sticky again. Obviously if you want to make a new thread feel free!
ebags
2014-10-03 04:48:00 UTC
Stoked!
I have your airbox, sliders (both upper and lower), block off plates, butterflies (although never installed, went with the full remove option), and gas tank mounts. Always regretted not getting your heel guards as I hate the plastic ones. Let me know when you're producing those!
I have your airbox, sliders (both upper and lower), block off plates, butterflies (although never installed, went with the full remove option), and gas tank mounts. Always regretted not getting your heel guards as I hate the plastic ones. Let me know when you're producing those!
Overshot
2014-10-03 13:41:00 UTC
Yay.
1290 airbox please.
1290 airbox please.
41KS
2014-10-06 20:49:00 UTC
Post missing.
Motohooligan
2014-10-08 02:00:00 UTC
Not sure if I'm at the Jobs level:) but close
I got a couple more parts back in stock. I will be updating the thread in the for sale section as I get stock back up.
I got a couple more parts back in stock. I will be updating the thread in the for sale section as I get stock back up.
wizzzard
2014-10-08 08:29:00 UTC
welcome back
ozarkhomie
2014-10-08 12:48:00 UTC
Welcome home Aaron and hoping for great success with the new business endeavor.
Just to let you know…your old SDR is alive and well in the Arkansas Ozarks…love this bike!!
Just to let you know…your old SDR is alive and well in the Arkansas Ozarks…love this bike!!
Motohooligan
2014-10-08 16:49:00 UTC
I got a little choked up
Hope she is doing well.....
Hope she is doing well.....
Motohooligan
2014-10-17 01:37:00 UTC
Moto boxes are at anodize now and should be ready to ship mid next week. I will open the store up for pre orders now.
MonkeyDuke
2014-10-18 00:38:00 UTC
YESSSSS!
Welcome back! Glad to hear you're back in business.
Looking forward to finally picking up an airbox for the 990!
cdv478
2014-10-20 21:23:00 UTC
Nice to see you back! You made some of the best products I've bought for my Superduke.
Motohooligan
2014-10-29 18:21:00 UTC
Everything is in stock and ready to ship as of today!!!!
Motohooligan
2014-10-29 19:13:00 UTC
How long before we will be seeing parts for the 1290r?