Good day from way too cold Finland atm.

Ive had SD for a while. The same bike twice actually. Made my second big mistake 4 years ago and sold her. Found and bought back last winter. Drove last summer a bit and felt lack of power. Started googling if anyone have put some positive pressure on intake manifold... I couldnt find any, and that where the idea came from. Gotta have it supercharged.
Started making some preparations, benched injectors and replaced with bigger ones. Got rid of evap shit. Moved battery etc. cables from the hugger to underneath seat. Made new brackets and so on. I'll be adding some photos if anyones interested and I find out how to do it...

Go for it! Photos are certainly appreciated, you could upload them to Imgur or Flickr and post the links here.

Lets try with some pics about the injectors. If this goes well, maybe ill add some more later. Tell me if the links wont work or im doing something wrong (like sharing my whole googledrive https://drive.google.com/file/d/1qgT02_ ... sp=sharing

Heres a bit about the wiring,

Original wiring and taken from ecu to battery etc. cut to lenght
https://drive.google.com/file/d/1Bfv0Tm ... sp=sharing
https://drive.google.com/file/d/1s3wnqs ... sp=sharing

New wiring from starter to battery
https://drive.google.com/file/d/1rRMdCy ... sp=sharing

More wiring work
https://drive.google.com/file/d/1MlVzBI ... sp=sharing

Removing the evap and such
https://drive.google.com/file/d/1aObh3o ... sp=sharing
https://drive.google.com/file/d/1dWxljn ... sp=sharing
https://drive.google.com/file/d/1zAAIh_ ... sp=sharing

Most of the wires needed some more lenght
https://drive.google.com/file/d/1acQ8nX ... sp=sharing
https://drive.google.com/file/d/1soSORH ... sp=sharing
https://drive.google.com/file/d/1Qn0y5V ... sp=sharing
https://drive.google.com/file/d/1RRG30y ... sp=sharing

This is what it looks like from the original battery bracket
https://drive.google.com/file/d/1BcCEyB ... sp=sharing

So now the wiring is all messed up at the seat and I needed some space for the battery and other shit. Had to take the plastic ones off and start measuring bigger ones.
https://drive.google.com/file/d/10XFy4s ... sp=sharing
https://drive.google.com/file/d/1_KyoOT ... sp=sharing

And here we go...
https://drive.google.com/file/d/15tfdGx ... sp=sharing
https://drive.google.com/file/d/1Lw9c5x ... sp=sharing
https://drive.google.com/file/d/1Slm-It ... sp=sharing

At its place
https://drive.google.com/file/d/1-HPOV7 ... sp=sharing
https://drive.google.com/file/d/1vmqlDU ... sp=sharing

As you can see, now we have the place for the add-on component were about to apply
https://drive.google.com/file/d/1_vXZOL ... sp=sharing
https://drive.google.com/file/d/1TWn0Vz ... sp=sharing

Why did you move the battery? Granted it's a pain to get to but weight was central and down low vs now up high. Worse situation for handling.

https://drive.google.com/file/d/1p0nxtk ... sp=sharing

btw that "bolt" is pain in the ass to remove. Took 6 hours of drilling, came out in 10 pieces.

https://drive.google.com/file/d/1BZu52y ... sp=sharing

im about to change that slider to a tensioner.

found one that fits from fiat scudo

https://drive.google.com/file/d/1AfpFZL ... sp=sharing

https://drive.google.com/file/d/1BkFkLJ ... sp=sharing

some days and maybe i will get the belt run...

after that starts the plenum work etc...