Hi all
Is the SDR tope yoke and bar mount compatable with the SD bottom and stem ?
Or will I need the SDR lower yoke too.
Thanks in anticipation
Phil
jambox
2014-09-25 10:13:00 UTC
bic_bicknell
2014-09-25 11:37:00 UTC
You need the bottom one as well as the rake is different on the sdr so won't match to standard ones
BassAgent
2014-09-25 14:06:00 UTC
Thankyou
BassAgent
2014-09-25 16:55:00 UTC
This is true. I got an SDR top yolk and it is very different in geometry than the silver SD item. I had to find a corresponding bottom yolk and stem before I could do the conversion.
MrK
2014-09-25 17:21:00 UTC
If you have the 07+ standard superduke, you do NOT need to change the bottom yoke, they will match up. You do need the spacers however.
BassAgent
2014-09-25 19:13:00 UTC
Ah, good news. Mine is an 07+ SD. Which spacers Bass ?
I'll look at the fiche and see if its obvious
Thanks
Phil
I'll look at the fiche and see if its obvious
Thanks
Phil
jambox
2014-09-25 19:15:00 UTC
Gotta go to class, will get back to you on this tonight
BassAgent
2014-09-25 19:31:00 UTC
These ?
KTM SPACER BUSHING 8,3X12X8 07 ... Part No: 61112006070
KTM SPACER BUSHING 8,3X12X8 07 ... Part No: 61112006070
jambox
2014-09-25 19:32:00 UTC
Mate, get one of those http://www.emigracing.com/ktm990SD3.htm
bic_bicknell
2014-09-25 22:53:00 UTC
Post missing.
BassAgent
2014-09-25 23:13:00 UTC
Post missing.
DribbleDuke
2014-09-26 02:16:00 UTC
Post missing.
bic_bicknell
2014-09-26 05:28:00 UTC
Post missing.
BassAgent
2014-09-26 05:41:00 UTC
Post missing.