The Gin Reaper
Okay, so I've finally got my Tuneecu cable working by using a different laptop, I've now managed to turn off the SAI, O2 and Secondaries.
I wanted to load up MrZ32's smoothened akra maps but it wont accept the SDR one.
Do I go with the SD one?
I have the autotune fitted so its no biggy as that will tune the bike with out me having to worry about anything but by going off of the following 2 statements I'd like to put his map into the ECU.
"I have also changed the f-l switchover so that the l map only runs at idle... 3-4K surging cured and lifting off the throttle doesn't quite have the same abruptness"
"By changing the FL switchover, you are effectively causing the bike to only read off one map at any usable rpm (which your dyno tuner will thank you for later on) but will revert to the closed loop cycle at idle (to allow better running at idle)."
Can anyone help?
Also what is the best A/F ratio I should be aiming for? Currently the autotune is set to 13.2 in all ranges
I wanted to load up MrZ32's smoothened akra maps but it wont accept the SDR one.
Do I go with the SD one?
I have the autotune fitted so its no biggy as that will tune the bike with out me having to worry about anything but by going off of the following 2 statements I'd like to put his map into the ECU.
"I have also changed the f-l switchover so that the l map only runs at idle... 3-4K surging cured and lifting off the throttle doesn't quite have the same abruptness"
"By changing the FL switchover, you are effectively causing the bike to only read off one map at any usable rpm (which your dyno tuner will thank you for later on) but will revert to the closed loop cycle at idle (to allow better running at idle)."
Can anyone help?
Also what is the best A/F ratio I should be aiming for? Currently the autotune is set to 13.2 in all ranges