Stock 2008 SD....original exhaust....I want to remove the SAS sistem to change the air box, if so, do i need remaping ? or can i only block the SAS with plates and do the o2 sensor plugs and SAS plug ??
on another note......can the SD run WITHOUT the upright position sensor intalled inside the light mask ?
thanks guys
evilwerkz
2012-03-23 17:43:00 UTC
jambox
2012-03-23 17:54:00 UTC
If just disabling/removing O2's and SAS, then no you don't need a remap.
But changing the airbox..... what to? MH, DNA, GPR, etc, then yes you will need a new map.
Why would you want to run without the tilt sensor?
But changing the airbox..... what to? MH, DNA, GPR, etc, then yes you will need a new map.
Why would you want to run without the tilt sensor?
DribbleDuke
2012-03-23 19:08:00 UTC
The short answer no.
More air and no new flow out the back side is tantamount to no new flow
Secondary air is to oxidize unspeant fuel, a richer mix and unspent will give a wonderful odor and fry your catalysts try a biPass on the tilt , should be relatively simple, like a thermostat or car hood switch.
Modify with exhaust first, then feed more Gogo juice. IMHO
More air and no new flow out the back side is tantamount to no new flow
Secondary air is to oxidize unspeant fuel, a richer mix and unspent will give a wonderful odor and fry your catalysts try a biPass on the tilt , should be relatively simple, like a thermostat or car hood switch.
Modify with exhaust first, then feed more Gogo juice. IMHO
evilwerkz
2012-03-23 22:01:00 UTC
no tilt sensor because I forgot to order it after my head on crash.....dumb me, LOL, if it can be bypassed, I'll bypass the sucka.....
and now I know I need to remap the unit if I'm going the CPR airbox way, cool, then I guess it'll have to wait some more time untill everything gets here, thanks guys
and now I know I need to remap the unit if I'm going the CPR airbox way, cool, then I guess it'll have to wait some more time untill everything gets here, thanks guys