I need new front wheel bearings for my 990.
Are all models of 990 the same part no?
Anyone in the UK have any recommendations, or experience of these?
http://www.ebay.co.uk/itm/KTM-SUPER-DUK ... 4897.l4275
TimR
2015-03-21 07:46:00 UTC
No. 47
2015-03-21 08:49:00 UTC
Have replaced mine two or three times, always with OE from Redline - wouldn't risk using unknown spec item for these from eBay for the sake of saving few pounds.
Aphex
2015-03-21 11:20:00 UTC
I used these,no problems with them at all.
http://www.ebay.co.uk/itm/370773899074? ... EBIDX%3AIT
If you'd prefer SKF or similar, just use the bearing id code and measurements to buy from a bearing supplier, such as..
http://simplybearings.co.uk/shop/index. ... oCF_Pw_wcB
http://www.ebay.co.uk/itm/370773899074? ... EBIDX%3AIT
If you'd prefer SKF or similar, just use the bearing id code and measurements to buy from a bearing supplier, such as..
http://simplybearings.co.uk/shop/index. ... oCF_Pw_wcB
No. 47
2016-07-05 17:02:00 UTC
Having just replaced head bearings, and about to replace front wheel bearings for the umpteenth time, looking to upgrade to higher quality than OE, starting with the front wheel bearings.
KTM front wheel bearings part number is 0625069068 GR.BALL BEAR.6906 DDU2CG23S6NM - Googling 6906 and DDU2CG23S6NM together and separately throws up a range of bearings from SKF et al and not always the same ones re size, sealed/unsealed, etc - anyone here able to offer informed advice re bearings upgrade?
KTM front wheel bearings part number is 0625069068 GR.BALL BEAR.6906 DDU2CG23S6NM - Googling 6906 and DDU2CG23S6NM together and separately throws up a range of bearings from SKF et al and not always the same ones re size, sealed/unsealed, etc - anyone here able to offer informed advice re bearings upgrade?
No. 47
2016-07-05 23:31:00 UTC
I cant help re the part numbers but anytime I want to upgrade bearings i usually have to go off the physical dimensions. That way you can pick and choose between manufacturers and get exactly what you want.
I guess you already knew that so sorry for stating the obvious
I guess you already knew that so sorry for stating the obvious
No. 47
2016-07-06 12:00:00 UTC
Would be helpful to know manuf. and specn. of OE items - these are just under £14 in UK.
Top end (as far as I can judge) SKF equivalents are circa £22 and £26, depending on seal type - are these just same specn. as OE but without bulk buy discount or are OE items lower specn/quality?
Top end (as far as I can judge) SKF equivalents are circa £22 and £26, depending on seal type - are these just same specn. as OE but without bulk buy discount or are OE items lower specn/quality?
No. 47
2016-07-06 12:20:00 UTC
Post missing.
No. 47
2016-07-06 12:28:00 UTC
Have donned the anorak and best quality appears to be SKF 61906 - 2RZ or 2RS - former is more expensive non-contact rubber seal version of rubber sealed latter - anyone know what benefit is of non-contact rubber seal option?
Anorak now off..........
Anorak now off..........
Loco
2016-07-06 12:32:00 UTC
Post missing.
DukeNukem999
2016-07-06 14:01:00 UTC
Just found these - http://www.qualitybearingsonline.com/w6 ... ve-bearing - £66 each.....................5 x better than OE?
No. 47
2016-07-06 14:12:00 UTC
Simply bearing online is a good source
No. 47
2016-07-06 15:34:00 UTC
Ta but it's quality not price that's important - seem to be all unbranded 'Budget EU'